E6000 Spray Adhesive

(1 customer review)

£6.99£8.99

E6000 Spray Adhesive is a permanent, multi-purpose latex-based adhesive without the toxic smells, fumes or unhealthy side effects. It is strong, flexible, water-resistant, resists bleed-through and yellowing and works well on most all materials. There is no other product like it!

So much more than Just Pudding Basins

  • Check Mark Satisfaction Guaranteed
  • Check Mark No Hassle Refunds
  • Check Mark Secure Payments
  • Check Mark Same working day despatch
  • Check Mark UK company / UK Stock
GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • PayPal
  • Apple Pay
Share this with others

Description

E6000 Spray Adhesive

This Pump Spray Glue is a permanent, multi-purpose latex-based adhesive without toxic smells, fumes or unhealthy side effects. It is strong, flexible, water-resistant, resists bleed-through and yellowing and works well on almost all materials. There is no other product like it!

  • No odor
  • Clean-up with water
  • Use on multiple surfaces
  • Extremely strong, flexible and resists water
  • Not harmful – contains no VOCs, harsh chemicals or propellants
  • Photo safe
  • Super easy to use – just spray
  • Dries translucent

FAQS

What substrates does E6000 Spray Adhesive work on?
Yes it can be used on a wide variety of substrates. Use on paper, wood, poster boards, cardboard, photos, foil, medium- to heavy-weight fabrics, vinyl, foam, Styrofoam, glass, felt, plastic, rubber, leather & metals.

What temperature range does E6000 Spray Adhesive withstand?
Application temperature: Best applied between 10 – 54 °C (50 – 130 °F). Service temperature / heat resistance: 10 – 65 °C (30 – 150 °F).

Is E6000 Spray Adhesive UV resistant?
Resists yellowing.

Can E6000 Spray Adhesive be used on Styrofoam™?
Yes. E6000 Spray can also be used on other foams.

Is E6000 Spray Adhesive water resistant?
Yes. Cured adhesive has good water resistance.

How long does E6000 Spray Adhesive take to dry?
Paper, photos, cardboard and foil: (read directions) Allow to dry 1 to 3 minutes. Porous materials: (read directions) Allow to dry 1-5 hours. Styrofoam may require an overnight cure. Non-Porous Materials: (read directions) Allow to dry 1-5 hours.

What is used to clean up uncured E6000® Spray Adhesive?
Regular warm water rinsing.

INSTRUCTIONS FOR SAFE USE

Follow these step-by-step directions when using Spray Adhesive:

1. Read all directions before using.
2. Shake vigorously before use.
3. Protect the surrounding area from overspray.
4. Point spray tip away from the face.
5. Hold the bottle 8-10 inches away from the surface.

6. PAPER, PHOTOS, CARDBOARD & FOIL: Spray a thin, light coat to one surface. Join materials and continue to apply pressure periodically making sure to secure corners. Allow to dry for 1-3 minutes.
7. POROUS MATERIALS (including foams and Styrofoam: Spray a heavy coat to both surfaces to be joined. Mate surfaces together. Allow to dry.*
8. NON-POROUS MATERIALS: Spray a light coat to one surface. Mate surfaces together. Allow to dry.*
9. IMPORTANT – CLEAN AFTER EACH USE: To prevent clogging, remove and rinse nozzle/straw. Pump warm tap water through the sprayer until all adhesive is cleared out. Then dry, replace in the bottle, secure cap. *Maximum strength may not be reached for 1-5 hours. Styrofoam may require an overnight cure.

Download: Product Data Sheet 

View the E6000 product range here.

GTIN / EAN Array SKU: E6000SPRAY Categories: , Tag:

1 review for E6000 Spray Adhesive

5.0 Rating
1-1 of 1 review
  1. Verified reviewVerified review - view originalExternal link

    Great product.

    (0) (1)
Add a review
E6000 Spray Adhesive E6000 Spray Adhesive
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required