White Unicorn SPiT - White Ning, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!WHITE PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedWhite Unicorn SPiT mixes with the Sparkling SPiT rangeYellow Paint, Gel & Stain < Back | Next > Cyan Paint, Gel & StainDIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

White Unicorn SPiT – White Ning

(5 customer reviews)

£10.99£14.99

  • WHITE PAINT, GEL STAIN and GLAZE in One!
  • Make your project as opaque or vibrant as your dreams require
  • Use as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tint
  • Penetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfaces
  • Provides a 3-dimensional effect
  • Jasmine scented
  • White Unicorn SPiT mixes with the Sparkling SPiT range

So much more than Just Pudding Basins

  • Check Mark Satisfaction Guaranteed
  • Check Mark No Hassle Refunds
  • Check Mark Secure Payments
  • Check Mark Same working day despatch
  • Check Mark UK company / UK Stock
GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • PayPal
  • Apple Pay
Share this with others

Description

White Unicorn SPiT – White Ning, allows anyone to turn ordinary objects into personalised MASTERPIECES!
Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!

  • WHITE PAINT, GEL STAIN and GLAZE in One!
  • Make your project as opaque or vibrant as your dreams require
  • Use as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tint
  • Penetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfaces
  • Provides a 3-dimensional effect
  • Jasmine scented
  • White Unicorn SPiT mixes with the Sparkling SPiT range

Yellow Paint, Gel & Stain < Back | Next > Cyan Paint, Gel & Stain


DIRECTIONS FOR USE AS A STAIN OR DYE:

SHAKE BEFORE USING.
Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.
Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.
Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.
Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.
After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.
Dust off thoroughly.
Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.
TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.

DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:

SHAKE BEFORE USING
Dilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.
Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.
Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.
Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.
Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.
Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.
Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.

CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.

If you have any further questions then visit our Unicorn SPiT FAQ Section

Safety Data Sheet can be download here.

SKU: UnicornWhite Categories: , Tags: ,

5 reviews for White Unicorn SPiT – White Ning

Customer Images

Image #1 from Sue Hollick
Image #1 from Sue Hollick

Sue Hollick

Project. Old coffee table updated with unicorn spit and resin.

(0) (0)
Image #1 from Sue Hollick
  1. Anonymous (Verified Product Purchased)

    Verified reviewVerified review - view originalExternal link

    A useful addition to my collection, as unicorn spit pigment is strong !

    (0) (0)
  2. Helen (Verified Product Purchased)

    Verified reviewVerified review - view originalExternal link

    Amazing product! Using it for the colours my handmade concrete pots for candles – definitely my preferred choice for adding colours! Will definitely be ordering more!

    (0) (0)
  3. Sue Hollick (Verified Product Purchased)

    Verified reviewVerified review - view originalExternal link

    Project. Old coffee table updated with unicorn spit and resin.

    (0) (0)
  4. Paul M. (Verified Product Purchased)

    Verified reviewVerified review - view originalExternal link

    The stuffs amazing.

    (0) (0)
  5. dawn T. (Verified Product Purchased)

    Verified reviewVerified review - view originalExternal link

    (0) (0)

Only logged in customers who have purchased this product may leave a review.

Cancel