• Gold 3 Pint Pudding Basin3 Pint Size Chart

    3 Pint – 1.7lt – Gold Pudding Basin and Lid (3 Pack)

    £8.99
    Add to cart Loading Done
  • Plastic red Pudding Basins 3pt3 Pint Size Chart

    3 Pint – 1.7lt – Red Pudding Basin and Lid (3 Pack)

    £8.99
    Add to cart Loading Done
  • Green 3 Pint Pudding Basins3 Pint Size Chart

    3 Pint – 1.7lt – Green Pudding Basin and Lid (3 Pack)

    £8.99
    Add to cart Loading Done
  • 3 Pint Lilac Pudding Basins3 Pint Size Chart

    3 Pint – 1.7lt – Lilac Pudding Basin and Lid (3 Pack)

    £8.99
    Add to cart Loading Done
  • Peach Pudding Basin 3 Pint3 Pint Size Chart

    3 Pint – 1.7lt – Peach Pudding Basin and Lid (3 Pack)

    £8.99
    Add to cart Loading Done
  • 3 Pint Pink Pudding Basins3 Pint Size Chart

    3 Pint – 1.7lt – Pink Pudding Basin and Lid (3 Pack)

    £8.99
    Add to cart Loading Done
  • 3 Pint Silver Pudding Basin3 Pint Size Chart

    3 Pint – 1.7lt – Silver Pudding Basin and Lid (3 Pack)

    £8.99
    Add to cart Loading Done
  • Yellow Pudding Basins and Lids 3 Pints3 Pint Size Chart

    3 Pint – 1.7lt – Yellow Pudding Basin and Lid (3 Pack)

    £8.99
    Add to cart Loading Done
  • Sale! Brown Artistic Vivations | MahoganyBrown Artistic Vivations | Mahogany

    Brown Artistic Vivations – Mahogany

    £14.99
    Add to cart Loading Done
  • Cyan Unicorn SPiT - Zia Teal, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!CYAN PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedCyan Unicorn SPiT mixes with the Sparkling SPiT rangeWhite Paint, Gel & Stain < Back | Next > Green Paint, Gel & StainDIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.Cyan Unicorn SPiT - Zia Teal, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!CYAN PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedCyan Unicorn SPiT mixes with the Sparkling SPiT rangeWhite Paint, Gel & Stain < Back | Next > Green Paint, Gel & StainDIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Cyan Unicorn SPiT – Zia Teal

    £10.99£14.99
  • Sale! E6000 Allure 3D Glue PaintE6000 Allure 3D Glue Paint

    E6000 Allure Dimensional Adhesive Paint 59ml

    £2.99
  • Sale! Metallic Blue Artistic VivationsMetallic Blue Artistic Vivations

    Blue Artistic Vivations Metallic – Oceanus

    £14.99
    Add to cart Loading Done
  • Sale! Rose Gold Metallic Artistic Vivations | AphroditeRose Gold Metallic Artistic Vivations | Aphrodite

    Rose Gold Artistic Vivations Metallic – Aphrodite

    £14.99
    Add to cart Loading Done
  • Sale! Turquoise Artistic Vivations MetallicTurquoise Artistic Vivations Metallic

    Turquoise Artistic Vivations Metallic – Atlantis

    £14.99
    Add to cart Loading Done
  • 4 Pint Blue Pudding Basin and Lid4 Pint Pudding Basin Size Chart

    4 Pint – 2.27lt – Blue Pudding Basin and Lid (2 Pack)

    £9.99
    Add to cart Loading Done
  • 4pt pudding basins

    4 Pint – 2.27lt – Clear Pudding Basin and Lid (2 Pack)

    £9.99
    Add to cart Loading Done
  • 4 Pint Gold Coloured Basins4 Pint Pudding Basin Size Chart

    4 Pint – 2.27lt – Gold Pudding Basin and Lid (2 Pack)

    £9.99
    Add to cart Loading Done
  • Green Pudding Basin 4 Pint Multipack of 24 Pint Pudding Basin Size Chart

    4 Pint – 2.27lt – Green Pudding Basin and Lid (2 Pack)

    £9.99
    Add to cart Loading Done
  • Large 4 Pint Lilac Pudding Basin4 Pint Pudding Basin Size Chart

    4 Pint – 2.27lt – Lilac Pudding Basin and Lid (2 Pack)

    £9.99
    Add to cart Loading Done
  • Large 4 Pint Peach Pudding Basin4 Pint Pudding Basin Size Chart

    4 Pint – 2.27lt – Peach Pudding Basin and Lid (2 Pack)

    £9.99
    Add to cart Loading Done
  • Large Pink Pudding Basins with Lids4 Pint Pudding Basin Size Chart

    4 Pint – 2.27lt – Pink Pudding Basin and Lid (2 Pack)

    £9.99
    Add to cart Loading Done
  • 4 Pint Large Pudding Basin and Lid Multipack of 24 Pint Pudding Basin Size Chart

    4 Pint – 2.27lt – Silver Pudding Basin and Lid (2 Pack)

    £9.99
    Add to cart Loading Done
  • Large Yellow Pudding Basin and Lid4 Pint Pudding Basin Size Chart

    4 Pint – 2.27lt – Yellow Pudding Basin and Lid (2 Pack)

    £9.99
    Add to cart Loading Done
  • Sale! Black Artistic VivationsBlack Artistic Vivations

    Black Artistic Vivations Pearlescent – Black Onyx

    £14.99
    Add to cart Loading Done
  • Green Unicorn SPiT - Dragons Belly, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!GREEN PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedGreen Unicorn SPiT mixes with the Sparkling SPiT rangeCyan Paint, Gel & Stain < Back | Next > Blue Paint, Gel & StainDIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Green Unicorn SPiT – Dragons Belly

    £10.99£14.99
  • Sale! Platinum Silver Artistic VivationsPlatinum Silver Artistic Vivations

    Platinum Silver Artistic Vivations Metallic – Artemis

    £14.99
    Add to cart Loading Done
  • Sale! White Artistic VivationsWhite Artistic Vivations

    White Artistic Vivations Pearlescent – Diamond White

    £14.99
    Add to cart Loading Done
  • Blue Unicorn SPiT - Blue Thunder, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!BLUE PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedBlue Unicorn SPiT mixes with the Sparkling SPiT rangeGreen Paint, Gel & Stain < Back | Next > Purple Paint, Gel & StainDIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.Blue Unicorn SPiT - Blue Thunder, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!BLUE PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedBlue Unicorn SPiT mixes with the Sparkling SPiT rangeGreen Paint, Gel & Stain < Back | Next > Purple Paint, Gel & StainDIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Blue Unicorn SPiT – Blue Thunder

    £10.99£14.99
  • Purple Unicorn SPiT - Purple Hill Majesty, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!PURPLE PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedPurple Unicorn SPiT mixes with the Sparkling SPiT rangeBlue Paint, Gel & Stain < Back | Next > Black Paint, Gel & StainUse Purple Unicorn SPiT as a paint, gel or stain on most any material. Create masterpieces on wood, glass, metal, fabric, pottery, concrete, laminate, wicker and most other substrates.GENERAL DIRECTIONS:SHAKE WELL and test small area before use. Can be applied with a brush, foam pad, or your hands! Dry time depends upon thickness of the application. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears. Unicorn SPiT dries quickly. Use a spray bottle of water to keep product from drying out and to easily manipulate. Once dry, use a non-waterbased coating to protect, add gloss and dimension.1, Laminate use: Sand the surface with 220 sand paper after cleaning, then dust well before applying.2, Glass: For best results, mix Unicorn SPiT with a WATER-BASED decoupage before applying to glass. For a solid/non-transparent colour, use a 1:1 ratio of Unicorn SPiT /decoupage. For more transparent colour (stained-glass style) results, use 1-part Unicorn SPiT to 4-parts decoupage. Apply mixture directly to glass and let cure completely. To add durability to the exterior of regularly handled items, spray a light, NON-WATER BASED clear coat over project and let dry.Fabric use:Stamping method: Use Unicorn SPiT full strength for “stamping” (creating design on a separate surface and then “stamping” it on to a fabric project).  Then, use a water bottle and your hand or brush to blend.Direct to fabric projects:  Mix Unicorn SPiT with 3-7 parts water in a spray bottle or cup and brush it on, drip it on or spray it on.   Protecting your finished project:  Use a NON-WATERBASED product intended for waterproofing fabric after Unicorn SPiT has completely dried. Washing: Fabric will retain much of the Unicorn SPiT colour if treated before washing (see various methods below)*.  For best results, wash in cold water by hand (with very little laundry detergent).  Rinse with cold water.  Various methods to increase the colourfastness of the Unicorn SPiT before washing are as follows:        - Fabric Medium:  Mix a Fabric Medium with Unicorn SPiT according to instructions on the Fabric Medium bottle.        - Allure® Dimensional Design Adhesive Paint:  Mix Unicorn SPiT with Allure Gloss (Shiny Clear) in a 1:1 ratio.  Dry flat 5 hours.  Washable after 72 hours.         - Non-waterbased fabric protectant:  Let Unicorn SPiT dry.  Apply protectant.  Allow to dry as indicated on product. Let set for 24 hours before washing.        - Hair Dryer:  Let Unicorn SPiT dry.  Use hottest blow dryer setting to heat fabric until fabric is hot.  Allow to cool back down to room temperature.  Let set for 24 hours before washing.        - Iron:  Let Unicorn SPiT dry.  Put iron on hottest setting (without moisture).  Lay wax paper over fabric.  Iron front and back of fabric until hot.  Allow to cool back down to room temperature.  Let set for 24 hours before washing.        - Vinegar:  Put fabric with dried Unicorn SPiT design in cold water/vinegar at a 1:1 ratio mix.  Let set in vinegar for 24 hours.  Rinse with cold water and a very small amount of laundry detergent immediately after removing from water/vinegar solution.  Lay flat to dry.        - Clothes dryer:  Put fabric with dried Unicorn SPiT design in dryer for 1 hour on hottest setting.  Remove and allow to cool to room temperature.  Let set for 24 hours before washing.    *Zia is not a colourfast colour.  Use other colours if project will be exposed to moisture.    NOTE:  If a more washed-out look is desired:  Let set for 24 hours before washing.  Machine wash in gentle cycle with cold water.  Machine dry if desired.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.Purple Unicorn SPiT - Purple Hill Majesty, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!PURPLE PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedPurple Unicorn SPiT mixes with the Sparkling SPiT rangeBlue Paint, Gel & Stain < Back | Next > Black Paint, Gel & StainUse Purple Unicorn SPiT as a paint, gel or stain on most any material. Create masterpieces on wood, glass, metal, fabric, pottery, concrete, laminate, wicker and most other substrates.GENERAL DIRECTIONS:SHAKE WELL and test small area before use. Can be applied with a brush, foam pad, or your hands! Dry time depends upon thickness of the application. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears. Unicorn SPiT dries quickly. Use a spray bottle of water to keep product from drying out and to easily manipulate. Once dry, use a non-waterbased coating to protect, add gloss and dimension.1, Laminate use: Sand the surface with 220 sand paper after cleaning, then dust well before applying.2, Glass: For best results, mix Unicorn SPiT with a WATER-BASED decoupage before applying to glass. For a solid/non-transparent colour, use a 1:1 ratio of Unicorn SPiT /decoupage. For more transparent colour (stained-glass style) results, use 1-part Unicorn SPiT to 4-parts decoupage. Apply mixture directly to glass and let cure completely. To add durability to the exterior of regularly handled items, spray a light, NON-WATER BASED clear coat over project and let dry.Fabric use:Stamping method: Use Unicorn SPiT full strength for “stamping” (creating design on a separate surface and then “stamping” it on to a fabric project).  Then, use a water bottle and your hand or brush to blend.Direct to fabric projects:  Mix Unicorn SPiT with 3-7 parts water in a spray bottle or cup and brush it on, drip it on or spray it on.   Protecting your finished project:  Use a NON-WATERBASED product intended for waterproofing fabric after Unicorn SPiT has completely dried. Washing: Fabric will retain much of the Unicorn SPiT colour if treated before washing (see various methods below)*.  For best results, wash in cold water by hand (with very little laundry detergent).  Rinse with cold water.  Various methods to increase the colourfastness of the Unicorn SPiT before washing are as follows:        - Fabric Medium:  Mix a Fabric Medium with Unicorn SPiT according to instructions on the Fabric Medium bottle.        - Allure® Dimensional Design Adhesive Paint:  Mix Unicorn SPiT with Allure Gloss (Shiny Clear) in a 1:1 ratio.  Dry flat 5 hours.  Washable after 72 hours.         - Non-waterbased fabric protectant:  Let Unicorn SPiT dry.  Apply protectant.  Allow to dry as indicated on product. Let set for 24 hours before washing.        - Hair Dryer:  Let Unicorn SPiT dry.  Use hottest blow dryer setting to heat fabric until fabric is hot.  Allow to cool back down to room temperature.  Let set for 24 hours before washing.        - Iron:  Let Unicorn SPiT dry.  Put iron on hottest setting (without moisture).  Lay wax paper over fabric.  Iron front and back of fabric until hot.  Allow to cool back down to room temperature.  Let set for 24 hours before washing.        - Vinegar:  Put fabric with dried Unicorn SPiT design in cold water/vinegar at a 1:1 ratio mix.  Let set in vinegar for 24 hours.  Rinse with cold water and a very small amount of laundry detergent immediately after removing from water/vinegar solution.  Lay flat to dry.        - Clothes dryer:  Put fabric with dried Unicorn SPiT design in dryer for 1 hour on hottest setting.  Remove and allow to cool to room temperature.  Let set for 24 hours before washing.    *Zia is not a colourfast colour.  Use other colours if project will be exposed to moisture.    NOTE:  If a more washed-out look is desired:  Let set for 24 hours before washing.  Machine wash in gentle cycle with cold water.  Machine dry if desired.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Purple Unicorn SPiT – Purple Hill Majesty

    £10.99£14.99
  • Pudding Basins in 3 Spring Colours1.5 Pint Size Chart

    1.5 Pint – 850ml – Spring Pudding Basin and Lid (3 Pack)

    £8.49
    Add to cart Loading Done